Produse pentru x pert pro poli (7)

The POLYREFLEX SUPER is a multilayer reflective thermal insulation made up of two outer sheets of 100% aluminum and a central layer of polyethylene air bubble. This product is ideal for those looking for an efficient solution to control the temperature in their spaces, enhancing thermal comfort and reducing energy consumption. Its innovative design ensures superior protection, providing a more comfortable environment.

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Phase aqueuse Hydrofuge, oléofuge imperméabilisant Effet déperlant – Longue durée – Passage soutenu Résiste aux acides, laisse respirer les supports. Ne rend pas les surfaces glissantes. Pierre de taille (calcaire), marbre, grès, plâtre, brique, terre cuite, béton… Idéal pour sols de parking, terrasses, pavés en béton, dalles de pierre, pavés auto-bloquants destinés aux revêtements des sols, trottoirs, rues piétonnes, pistes de stations services, péages d’autoroutes, aires de stationnements, plages de piscines, terrasses, balcons, sols, escaliers, trottoirs… Réf:AT413 Conditionnement:Bidon de 1 L – Carton de 12 Ex:PROTEAX ANTI TACHE

Aperçu de notre gamme de Filtres à Air de rechange .

Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System.When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Item: Phytophanere Hair & Nails Dietary Supplement Main Purpose: Anti-Hair Loss Volume: 240 Caps (2x120 caps) Condition: New Expiration Date: 01/2027 Country of Manufacture: Italy UPC: 3338221001085 Brand: PHYTO Net Weight: 40,8 gr Department: Adult, Unisex Type: Hair Loss Prevention Hair Color Shade: Brown Formulation: Tablets/Capsules Hair Type: All Hair Types Features: Paraben-Free, Contains Vitamins Location: Paris, France

XFX SPEEDSTER MERC 310 AMD Radeon RX 7900 XTX Black Edition (Radeon RX 7000 Series) Type: Desktop Graphics Card Memory Type: GDDR6 ​ ​Condition: Brand New, Original Package Warranty: 3 Years ​ Available Stock: 80 Pieces Monthly Supply Volume: Max. 80 Pieces Minimum Order (MOQ): 20 Pieces